When I first wanted to try a Japanese Super Famicom to English Cart Translation I bought a ready made DIP36 – TSOP40 Adapter Board with…
These Super Famicom translations/conversions are very similar to the Mother 2 to Earthbound Conversion. The couple of SFC carts I’ve made or tested have had just one original…
This page is nowhere near finished, but I’ve put together some photo’s of me inverting my DMG-01 screen, ready to to a “bivert” mod. Here’s…
Original GameBoy DMG-01 Backlight I actually prefer this to the GBC Frontlight below. It’s actually two mods – fitting an hex inverter, and fitting a…
After picking up an original brick-style GameBoy DMG-01 recently to install a backlight, I found that the screen was plagued with missing pixels, forming vertical…
Since I started messing with SNES cart modifications I couldn’t resist this project, I wanted to convert a Japanese Super Famicom Mother 2 cart into…
Out of sheer curiousity, after making a tidy Super Mario RPG cartridge, I wanted to try a Star Ocean English cart. Using the same 29L3211…
PAL GameCubes have an official RGB lead which connect to the analogue port, NTSC Game Cubes do not output RGB through the analogue port (instead…
If you’ve fitted a Region Switch to your NTSC Game Cube then you may want to replace the ordinary orange LED with a dual colour…
If you’ve got either an American or Japanese Game Cube then it’s quite simple to fit a switch to allow you to swap between either…