Comments for mmmonkey

Comment on Star Ocean Translated Cart by newo

newo — Mon, 20 May 2013 12:46:30 +0000

Just gave this a go with the PAL mod. Seems to work fine on 50 hz + lockout chop disabled.

Comment on Sega Saturn 50/60Hz Mod by Richard B

Richard B — Fri, 17 May 2013 01:29:15 +0000

Great guide; thanks for this. I recently got a Model 2 Saturn that required this specific mod. Depending on what model and revision machine you have the 50/60Hz mod can differ. For example on my Model 1 machine you just need to solder a switch to JP1 to flick between 50 and 60Hz. On other Model 2′s, there are points at the rear of the machine near the battery/VCD compartment that need a switch soldering to them so make sure you do the right mod depending on what model you have!

Comment on PC Engine RGB Mod by Rico

Rico — Thu, 16 May 2013 00:57:44 +0000

I’ve build this mod & rgb amp and it worked fine, But now I rewired everything because I want to directly attach the scart cable to the PCE.
And now all I get is a very dark picture, almost not visable and no colors.. any idea’s what is going wrong ? I’ve tried to remove the rgb amp but it’s still the same picture :(

Comment on Sega Saturn Region Free BIOS by Juan

Juan — Thu, 09 May 2013 15:09:28 +0000

Hi,

First of all thank you very much for this site.
I’ve only one comment, it is not possible to dowmload the Saturn 50/60hz and Reset – PIC16f630 file. Please could you repair the link?? I’m very interested on it because I have a Saturn model 1 with the freebios and chip intalled and I would like to do the 50/60 switchless mod.

Thank you very much in advance

Comment on Consolised MVS (CMVS) Conversion One slot MV-1FZ by Francisco

Francisco — Tue, 07 May 2013 17:07:04 +0000

I’m trying to download the latest information not being possible.
Please. need help

Francisco

Comment on Mega Drive 2 – 2 regions Switch by Evan Jones

Evan Jones — Tue, 07 May 2013 10:30:52 +0000

Hey, just as a follow up on this mod. I had it working for about a week and then one day while playing a game on Jap 50hz it switched to Jap 60hz and no longer plays my PAL games no matter what I do.

I have been playing mt NTSC games on Jap 50hz as the colour doesnt work on 60hz mode. So i start the game in Jap 60hz and then once it starts I switch to 50hz to get the colour working properly.

Any ideas?

Comment on Consolised MVS (CMVS) Conversion One slot MV-1FZ by Phil

Phil — Sat, 04 May 2013 18:09:53 +0000

Hi the links seem to be broken again. I’m getting this error ‘/home/mmmonkey/public_html/wordpress/wp-content/plugins/download-manager/cache/ must have to be writable!”

Cheers

Comment on GameBoy DMG-01 Screen Invert by robert

robert — Tue, 30 Apr 2013 19:22:14 +0000

do you think you could attach an on/off switch somewhere in here maybe on the power wire? so that if i want it on, i switch it on, and if i want normal colors i switch it off.

Comment on Dreamcast Internal VGA Mod by MrAlextov

MrAlextov — Mon, 29 Apr 2013 17:54:31 +0000

There are some games where doesn’t support VGA and if you want to play such of these games you need to flick the switch to disable.

Comment on Dreamcast Internal VGA Mod by jse

jse — Wed, 24 Apr 2013 15:26:39 +0000

Thanks very much for the guide :) just finished doing the mod. I soldered the perfboard in reverse as I assumed the pic was the back of the board because the cuts were shown but it still worked :P thanks again for the great guide.